MIL-DTL-29397B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
69 Fell facings.
(cont'd)
c. Fell the eyelet cover to the
Hand
8-10
C
right front facing along the bottom
(silk)
edge of cover.
d. Tack the eyelet cover to the
Hand
4-6
C
right front facing along the folded
per
(silk)
edge of lining. Place one tack
tack
midway between the second and third
eyelet from the top, and one tack
midway between the fourth and fifth
eyelet from the top.
70 Sew hooks and eyes to collar.
Finished appearance. The hook and
eye shall be positioned to properly
engage each other, effecting a flat,
smooth closure at the front of collar
without misalignment.
a. Position and securely sew the
Hand
16 per
C
hook to the left end and the eye to
hook
(silk)
the right end of the collar. The
16 per
hook and eye shall be positioned with
eye
their front edges even with the
respective front ends of the collar
and securely sewn to the collar at
the top and bottom of the forward
edge of the hook and eye. The
stitching on each side shall not be
more than 3/8 inch from the front end
of collar through the individual
holes at the rear of the hook and
eye.
71 Finish collar.
a. Securely tack the lower corners
Hand
8-10
C
of the collar to the jacket.
(silk)
b. Turn under the end and top edge
Hand
8-10
C
of the lining at the right and left
(silk)
end of the collar and position the
folded edge of the lining under the
hook. Fell the folded end of the
collar lining to the end of the
collar and continue felling along the
top folded edge of the end to the
stitching joining the lining to the
collar.
43
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business