MIL-DTL-29397B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
b. Spread open the shoulder seam and
press flat, holding the shoulders
short and exercising much care in
pressing in order not to effect a
distorted appearance in the finished
seam. The pressing shall be
accomplished with a heated pressing
iron or pressing machine over a
suitable block.
58 Set shoulder loops to jacket back.
a. The front end of loop shall be
301
EFb-1
10-14
A
A
stitched 5/8 inch in front of the
(silk)
(silk)
shoulder seam and aligned with each
other.
b. Fold loop back, turn under the
301
EFb-1
10-14
A
A
back end of the loop and stitch the
(silk)
(silk)
loop to the jacket only 1/16 inch
from the turned edge catching the
turned under portion in the
stitching.
59 Baste shoulder.
a. Position the front lining and
Hand
jacket front interlining at the neck,
or
shoulder and armhole edges of the
301
Hopper
fronts. Baste all plies together on
the outside along the front edge of
armhole and continue along the
shoulder seam and the gorge, catching
the shoulder pad in the basting.
Turn the jacket on the inside.
60 Baste back lining and facing-lining
assembly at shoulders.
a. Turn under and lap the shoulder
Hand
edge of the back lining on the
facing-lining assembly. Baste lining
along the folded edge of the back
lining with the top end of the chest
pleat and eyelet cover caught in the
basting.
38
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business