MIL-DTL-29397B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
68 Fell sleeve lining at armhole.
(cont'd)
b. Turn under the armhole edge of
Hand
8-10
C
the sleeve lining and lap the lining
(silk)
on the outside of the front and back
lining and the top edge of the
underarm shield. Fell the sleeve
lining to the jacket around the
entire armhole, placing the stitching
over the folded edge of the sleeve
lining, catching the underarm shield
in the felling and distributing the
fullness in accordance with good
commercial practice. Backstitch the
lower armhole edge from backarm seam
of sleeve to the front edge of the
shield.
c. Machine stitch the lower edge of
301
SSa-1
10-14
A
A
the sleeve lining, at the armhole, on
the inside from forearm seam to
backarm seam and hand fell the
remaining portion as specified in
operation 67.a.
-or-
d. Machine stitch the lower edge of
Machine
8-10
C
the sleeve lining, at the armhole on
(silk)
the inside from forearm seam to
backarm seam and stitch the remaining
portion of the sleeve lining at the
armhole with machine simulated hand
felling.
NOTE: It is required that the
simulated hand felling produced by
machine shall be equal to or better
than the hand felling.
69 Fell facings.
a. Fell the facing to the piping at
Hand
8-10
C
the bottom edge of the jacket,
(silk)
starting at the bottom edge of the
lining and continuing along the back
and bottom edges of facing to the
front edge of jacket, catching the
eyelet cover in the felling.
b. Fell the folded edge of the
Hand
8-10
C
facings to the piping along the top
(silk)
edge from collar to notch to front
edge of jacket.
42
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business