MIL-DTL-29478A(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
a. Position and securely sew the
Hand
16 per
C
hook to the left end and the eye to
hook
(silk)
the right end of the collar. The
and eye (double
hook and eye shall be positioned with
thread)
their front edges even with the
respective front ends of the collar
and securely sewn to the collar at
the top and bottom edge of the hook
and eye. The stitching on each side
shall not be more than 3/8 inch from
the front end of the collar, through
the individual holes at the rear of
the hook and eye.
72 Finish collar.
a. Securely tack the lower corners
Hand
8-10
C
of the collar to the coat.
(silk)
b. Turn under the end and top edge
Hand
8-10
C
of the lining at the right and left
(silk)
end of the collar and position the
folded edge of the lining under the
hook. Fell the folded end of the
collar lining to the end of the
collar and continue felling along the
top folded edge of the end to the
stitching joining the lining to the
collar.
c. Turn under and fell the lower
Hand
8-10
C
edge of the collar lining to the coat
(silk)
from end to end, catching the
turned-under portion of the lining at
the right and left end in the
felling.
d. Fell the collar extension tab
Hand
8-10
C
from the underside, the collar,
(silk)
across the left front end of the
collar, leaving an opening of 1/4 to
3/8 inches between the stitching line
and the inside back edge of the eye
to properly engage hook. Continue
felling along the folded top edge to
the end of the stitching, joining the
lining to the collar.
e. Turn the collar eyelet covers to
Hand
8-10
C
the inside of the collar and fell the
(silk)
cover to the collar lining along the
front edge. Continue the felling
along the bottom edge for a distance
of approximately 1/2 inch from the
front edge.
45
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business