MIL-DTL-29478A(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
68 Fell back lining and facing-lining
assembly at shoulders.
a. Fell the back lining and
Hand
8-10
C
facing-lining assembly together at
(silk)
the shoulders, placing the stitching
over the folded edge of back lining
and securing the top end of the chest
pleat in the felling.
69 Fell sleeve lining at armhole.
a. Position the sleeve lining at the
armhole with the back and forearm
seams of the sleeve and sleeve lining
matching.
b. Turn under the armhole edge of
Hand
8-10
C
the sleeve lining and lap the lining
(silk)
on the outside of the front and back
lining and the top edge of the
underarm shield. Fell the sleeve
lining to the coat around the entire
armhole, placing the stitching over
the folded edge of the sleeve lining,
catching the underarm shield in the
felling and distributing the fullness
in accordance with good commercial
practice. Backstitch the lower
armhole edge from backarm seam of
sleeve to the front edge of the
shield.
-or-
c. Machine stitch the lower edge of
301
SSa-1
10-14
A
A
the sleeve lining, at the armhole, on
the inside from forearm seam to
backarm seam, and hand fell the
remaining portion as specified in
operation 67.a.
-or-
d. Machine stitch the lower edge of
Machine
8-10
C
the sleeve lining, at the armhole on
(silk)
the inside from forearm seam to
backarm seam, and stitch the
remaining portion of the sleeve
lining at the armhole with machine
simulated hand felling.
43
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business