MIL-DTL-82125B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
4
(cont'd)
Make collar.
d. Position under collar stand on
301
SSz-3
10-14
A
A
outside of under collar with notches
(a)
matching. Join together at the lower
edge with a 1/4 inch seam.
e. Spread open the seam and
301
SSz-3
10-14
A
A
topstitch, each side 1/16 inch from
(b)
(silk)
(silk)
the seam.
f. Position top collar stand on
301
SSz-3
10-14
A
A
outside of top collar with notches
(a)
matching and join together at the
lower edge with a 1/4 inch seam.
g. Spread open the seam and
301
SSz-3
10-14
A
A
topstitch, each side 1/16 inch from
(b)
(silk)
(silk)
the seam.
h. Position the top collar and under
301
SSe-2
10-14
A
A
collar with edges even and seam
(a)
together at the top and side edges,
3/16 inch from the edges.
i. Turn collar completely, working
301
SSe-2
10-14
A
A
out the edges and topstitch 3/16 inch
(b)
(silk)
(silk)
from the seamed edges.
j. Seam collar and under collar
301
SSa-1
10-14
A
A
together 1/8 inch from the bottom raw
(silk)
(silk)
edges.
5
Make left front ornamental piece.
Finished appearance. The left front
ornamental piece shall finish smooth
and flat, without twists, gathers,
puckers, pleats, or raw edges.
a. The ornamental piece shall be
made of two pieces of basic material.
b. Stitch the two pieces together
301
SSa-1
10-14
A
A
from front square end to notch with a
3/8 inch seam.
c. Spread open the seam and press
flat with a heated pressing iron.
d. Notch along the curved raw edges
Hand
for proper turning. Turn all raw
edges 3/8 inch to the inside and
baste along the turned edges.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business