MIL-DTL-82125B(MC)
ITEM
PATTERN NOMENCLATURE
NO. OF CUT PARTS
Material:
Cloth, tropical, polyester wool/blend
1
Front
2
2
Back
2
3
Front facing
2
4
Top collar
1
5
Under collar
1
6
Neck facing
1
7
Ornamental right front
2
8
Ornamental left front
2
9
Collar stand
2
Material:
Cloth, satin, rayon
2
Front
10
2
Back
11
Material:
Cloth, cotton or synthetic warp, spun
hair-wool filling interlining (coat front)
2
Front
12
1
Under collar
13
1
Collar stand
14
Marker
15
Ornamentation -- Front marker
-
3.6. Construction.
3.6.1 Manufacturing requirements. The capes shall be
manufactured in strict accordance with the operations and the
stitch, seam, and stitching types specified in Table I.
3.6.1.1. Operations. The contractor is not required to follow
the exact sequence of operations as listed in Table I, but all
operations specified shall be used to manufacture the cape.
3.6.1.2. Stitches, seams and stitching. The stitch, seam and
stitching types specified in Table I shall conform to
FED-STD-751. The number of stitches per inch as specified in
Table I indicates the minimum and maximum number permitted.
3.6.1.2.1 Tacking and backstitching. Ends of seams and
stitching, produced with 301 type stitch, when not caught in
other seams or stitching (except ends of continuous line of
stitching) shall be securely backtacked not less than 1/4 inch.
Thread breaks (all stitch types) shall be secured by stitching
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business