MIL-DTL-82125B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
26 Second baste facing.
a. Baste the facing to fronts as
301
Hopper
close as possible to the
or
facing-lining seam, placing the
Hand
fullness towards the chest. The
basting shall extend from the
shoulder seam down to approximately 3
inches from the bottom of facing.
Place a second row of basting along
top edge of rayon tape at bottom.
27 Fell facing to interlining.
a. Turn back the lining and fell the
Hand
4-6
C
right and left facing-lining seam
or
(silk)
allowance to the respective front
103
SSm-1
4-6
A
interlining. The felling shall
(silk)
extend from the shoulder seam down to
approximately 4 inches from the
bottom of facing.
28 Fell bottom turnup.
Finished appearance. In the finished
cape, the lining shall not be visible
below the bottom edge of cape.
a. Fell the edge of the tape at the
103
EFl-1
4-6
A
bottom turn-up including the front
(silk)
facing to the body of the cape with
blind stitching.
29 Baste body lining to cape.
a. Match side seams of cape and
301
Hopper
lining. Baste the front lining to
or
the cape, starting at the top end of
Hand
side seam and as close to the side
seam as possible, to approximately 3
inches from bottom finished edge of
cape. Baste the front and back
lining along the arm slit opening
with the back lining and back part
lying smooth and flat. The front and
back lining at the arm slit opening
shall not be exposed to the outside
of cape.
b. Fell the folded edges of the
Hand
4-6
C
front and back lining of the arm slit
(silk)
opening.
19
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business