MIL-DTL-82125B(MC)
snap fasteners. The thread for basting shall be a good
commercial grade.
3.3.6.3. Color and colorfastness. The thread shall be black,
except the silk thread for seaming and stitching the body lining
shall be scarlet. The cotton thread for basting may be white.
The colored threads shall show good fastness to wet (dry)
cleaning and, in addition, the silk thread shall show good
fastness to light (see DoD Standard Color Card of Official
Standardized Shades for Sewing Threads 1968).
3.3.7 Insignia button. The insignia button shall be metal, gold
plated, officer design, 40-line, conforming to type I, style 4,
class A, sub-class 1, short shank of MIL-DTL-3461. One insignia
button per cape is required.
3.3.8 Labels. Each cape shall have an identification label and
a size label conforming to DDD-L-20 and the following.
Colorfastness for dry cleaning shall apply.
3.3.8.1. Identification label. The identification label shall be
type VI, class 1. The content and format shall be as follows:
Nomenclature: (item description)
Contract number:
Name of contractor:
Wool Products Act information
NOTE:
Size of characters for "Name of contractor" shall be
minimum 8 point (approximately 3/32 inch).
3.3.8.2. Size label. The size label shall be type VI, class 2.
The label shall consist of the cape size (see 2.1) indicated by
letters S (Small), M (Medium), or L (Large), and the stock
number, as shown in the following example:
M
Stock number
The stock number may be omitted from the size label but when
omitted, it shall be incorporated in the identification label.
3.3.9 Finishing tape. The tape for finishing the bottom of the
cape shall be rayon woven tape with selvages. The tape shall be
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business