MIL-DTL-82125B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
Join back and front lining at sides.
8
(cont'd)
a. Position the back and fronts with
301
SSa-1
10-14
A
A
edges even and join together at the
(silk)
(silk)
sides with a 3/4 inch seam; leaving
an opening for arm slit from notch to
notch.
b. Spread open the side seams,
including the arm slit opening, and
press flat with a heated pressing
iron.
c. Neatly and evenly pink the seam
allowance of side and center back 1/8
inch in depth. When the center back
is cut on the selvage, pinking is not
required.
9
Join lining at shoulders.
Finished appearance. The shoulder
seam shall be uniformly stitched
without a distorted appearance.
a. Join the fronts and back together
301
SSa-1
10-14
A
A
at the shoulders with a 3/8 inch
(silk)
(silk)
seam.
b. Spread open the shoulder seam and
press flat with a heated pressing
iron or pressing machine.
10 Stitch darts in front and back
lining.
Finished appearance. The darts shall
be tapered to a point at each end and
shall finish without gathers,
puckers, or pleats.
a. Fold the front and back lining,
301
SSa-1
10-14
A
A
matching the cut edges of the front
(silk)
(silk)
and back darts. Stitch the entire
length of the dart, catching the
shoulder and side seams in the
stitching 3/8 inch from cut edge at
the front and back lining and
tapering to zero at both ends.
b. Spread open the dart seams and
press flat with a heated pressing
iron or pressing machine.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business