MIL-DTL-29396B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
a. Lap the 3/4 inch wide strip of
301
LSa-1
8-10
A
A
binding on the outside of the jacket
front interlining from the collar
notch to shoulder point,
approximately 1/4 inch. Stitch the
binding to the interlining 1/8 inch
from the raw edge of the binding.
b. Smoothly fold the free edge of
301
SSa-1
10-14
A
A
the binding over the top edge and to
the underside of the interlining.
Secure the free edge of binding to
the interlining with a row of
stitches 1/8 inch from the raw edge
of the binding.
38 Fell piping to jacket front
interlining.
a. Place the inner edge of piping on
101
the outside of the interlining at the
top, front and bottom edges. Baste
piping to interlining through the
fronts.
38 Fell piping to jacket front
interlining. (cont'd)
b. Fell the front and lower edge of
301
EFc-1
4-6
A
A
the piping to the jacket front
or
interlining.
Hand
C
C
(silk)
c. Tack the raw edge of the bottom
301
SSa-1
4-6
C
C
piping to each seam allowance of
or
(silk)
jacket.
Hand
d. Pull and remove basting stitches
from piping.
e. Press the left and right fronts,
respectively, on a suitable type
heated pressing machine with the
chest to conform to the shape of the
body.
28
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business